(1) this device may not cause harmful interference, and (2) this device must accept any REPLACING PROPELLERS interference received, including interference that may cause undesired operation. EXPLODED VIEW H107D TROUBLESHOOTING SPARE PART CHART H107D H107D THE HUBSAN X4 THE HUBSAN X4...
1 INTRODUCTION H107D SPARE PART CHART Thank you for buying HUBSAN products. The X4 quadcopter is designed as an easy-to-use, full-featured RC model capable of hovering, fast forward, and aerobatic flight maneuvers. Please read the manual carefully and follow all instructions in it. Be sure to retain the manual for future reference, routine maintenance, and tuning.
Page 5
If you intend to use the SD card in another device, first save any files to your Do not attempt to disassemble or modify or repair the LiPo battery. computer before formatting the card. H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Ensure that the battery and the cables are inserted into the 2.5 Proper Operation For safety only use the included HUBSAN spare parts for replacement. 2.6 Always Be Aware of the Rotating Blades 0:08:49 0:08:49 When in operation, the main and tail rotor blades will be spinning at high speed.
LiPo battery recycling center. (1) Replace the motor. (2) Resolder any broken motor connections. (3) Spin the propellers to see if it jammed the motors, make sure the propellers can spin normally. H107D H107D THE HUBSAN X4 THE HUBSAN X4...
White B Black Blue White No use now 4 Elevator Trim 6 Throttle Trim White Stick der Stick Blue Black 5 Rudder Trim 3 Aileron Trim Red A MODE 2 Red B H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 9
Li-po battery Connect earphone after we upgrade the transmitter, now there is no voice Earphone socket Upper shell LED(Red) transmission Lower shell LED(Blue) Screw(PB1.4*3) Screw(PA1.4*4) Rubber feet-1 Camera PCB module Rubber feet-2 H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 10
Attention: After a crash landing, the protection cover will loose and block the propellers, check and press back the four cover holes before flying again. PUSH PUSH Replace cover Remove the cover according to the correct polarities H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 11
After any crash landing, always check to make sure the protection cover is still on tight, and that the body, motors and propellers are not damaged. H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 12
ALWAYS FORMAT AND ACTIVATE CAMERA RECORDING BEFORE FLIGHT! 0:08:49 0:08:49 MAIN MENU Format SD Card Are you sure: Play Record Set Real Time Format SD Card Set Reverse Set Sensitive 5.8G Frequence Exit H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 13
Press the button to switch ON/OFF video recording flight in order to make sure the SD card is formatted. Formatting while in flight will result in loss of control. MODE 2 MODE 1 H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 14
Use the Elevator stick to enter Expert mode. Press the Throttle stick to enter Flip Mode, indicated by two "beeps". angle with the ground, and add throttle to climb before you perform a flip. H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 15
1. Learn how to fly the X4 and maintain control both indoors and outdoors at an altitude no higher Format SD Card Aileron : Set Reverse Rudder : Set Sensitive 5.8G Frequence you can predetermine your stick movements. It is very different to look at an LCD or goggles and H107D H107D THE HUBSAN X4 THE HUBSAN X4...
Page 16
CAUTION: To avoid loss of control, always move the transmitter sticks slowly. Be aware that during maneuvers. MODE 2 MODE 1 MODE 2 MODE 1 quadcopter. Aileron moves your quadcopter left and right. H107D H107D THE HUBSAN X4 THE HUBSAN X4...