Table of Contents
Advertisement
Description of N-595 Monitor
N-595
The N-595 Monitor is intended for the continuous non-invasive monitoring of
functional oxygen saturation of arterial hemoglobin (SpO
N-595 is intended for use with neonatal, pediatric, and adult patients during both
no-motion and motion conditions and for patients who are well or poorly
perfused, in hospitals, hospital-type facilities, intra-hospital transport, and home
environments. For prescription use only.
Note:
Hospital use typically covers such areas as general care floors, operating
rooms, special procedure areas, intensive and critical care areas, within
the hospital plus hospital-type facilities. Hospital-type facilities include
physician office based facilities, sleep labs, skilled nursing facilities,
surgicenters, and sub-acute centers.
Intra-hospital transport includes transport of a patient within the hospital
or hospital-type facility.
Home Care use is defined as managed/used by a lay person (parent or
other similar non-critical caregiver) in the home environment.
Use with any particular patient requires the selection of an appropriate
O
-M
oxygen sensor as described in the N-595 Operator's Manual.
XI
AX
Motion performance claims are applicable to models MAX-A, MAX-AL,
MAX-P, MAX-N, and MAX-I Nellcor O
Through the use of the four softkeys, the operator can access trend information,
select an alarm limit to be changed, choose the language to be used, adjust the
internal time clock, and change communications protocol. The N-595 can operate
on AC power or on an internal battery. The controls and indicators for the N-595
are illustrated and identified in Figure 1 and Figure 2.
Introduction
) and pulse rate. The
2
M
oximetry sensors.
TM
XI
AX
3
Advertisement
Table of Contents
