Advertisement
Quick Links
PID 11752
3G Digital SDI 8X1 Switch with Reclock function
User's Manual
Content
1 INTRODUCTION....................................................1
2 SPECIFICATION.....................................................1
3 PACKAGE CONTENT.............................................2
4 PANEL DESCRIPTION............................................2
5 CONNECTION AND OPERATION.............................3
Advertisement
Related Manuals for Monoprice PID 11752
Summary of Contents for Monoprice PID 11752
-
Page 1: Table Of Contents
PID 11752 3G Digital SDI 8X1 Switch with Reclock function User’s Manual Content 1 INTRODUCTION………………….…………………………1 2 SPECIFICATION…………..……..…………………..……..1 3 PACKAGE CONTENT……….……………………………..2 4 PANEL DESCRIPTION………………….………….………2 5 CONNECTION AND OPERATION…………..……………3... -
Page 2: Introduction
SDI 8X1 Switcher with Reclock SDI 8x1 Switcher with Reclock DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read the following instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1 INTRODUCTION 1.1 Product Description This is an 8X1switcher, any eight of the SD-SDI, HD-SDI or 3G-SDI signals are... -
Page 3: Package Content
SDI 8X1 Switcher with Reclock Output Connector 1xSDI BNC Male Support line length (Cable is RG59 ) 3G(1080P 60HZ) Mode Up to 80M HD(720P 60HZ)Mode Up to 130M SD(480i)Mode Up to 220M Mechanical Size(L-W-H) 257×133×26MM Weight (Net) 863G Warranty Limited Warranty 1 Year Environmental Operating Temperature... -
Page 4: Connection And Operation
SDI 8X1 Switcher with Reclock Power in, DC 5V/2A adapter available; RS232 interface, connect to computer system; Eight SDI inputs, connect to SDI sources, such as SDI Camera; One SDI output, connect to SDI monitor or other SDI Device. 5 CONNECTION AND OPERATION 5.1 Connection and Operation (1) Connect the product to appropriate power;... - Page 5 SDI 8X1 Switcher with Reclock 5, Select the corresponding serial number which need to start, then you can realize the switching function. Under the “Hyper terminal” operating system: 1, Start the “hyper terminal” software. (Menu Procedure Communication hyper terminal, then press Enter) Input the name as your preference New Connection show interface, + Enter.