Wiring - Thermo Scientific Jewett PRF17 Installation & Operation Manual

Refrigerator/freezers
Table of Contents

Advertisement

Installation

Wiring

Wiring
Before connecting your freezer to a power source, be sure to check the dataplate for correct
voltage. Standard NEMA plugs are provided with all units.
Always connect the equipment to a dedicated (separate) circuit. Electrical codes require fuse or
circuit breaker protection for branch circuit conductors. Use time delay fuses for #12 AWG
circuits.
8
Installation and Operation
Keep flammable materials and vapors away from refrigerator. Failure
Explosion Hazard
to do so can result in death, explosion, or fire.
Operation under electrical conditions other than those specified on the
CAUTION
dataplate will cause permanent damage to the mechanism. The dataplate is
located inside the refrigerator at the top of the right hand wall.
For personal safety and trouble-free operation, this unit must be properly
WARNING
grounded before it is used. Failure to ground the equipment may cause
personal injury or damage to the equipment. Always conform to the
National Electrical Code and local codes. Do not connect unit to already
overloaded power lines.
CAUTION Do not use an outlet that can be turned off by a switch.
Thermo Scientific Jewett
PRF
17 Refrigerator/Freezers

Advertisement

Table of Contents
loading

Table of Contents