Atdec AWM-LR Installation Manual

Dual Crossbar
COMPONENT CHECKLIST
A
Crossbar
Assembly
(x1)
B
VESA Plate Handle
(x2)
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can exceed
the capacity of the mount even though the monitor weight may be within the stated range.
! The manufacturer accepts no responsibility for incorrect installation.
! This product is compatible with AWM Series monitor arm products.
D E
Screw Screw
M4x10mm M4x12mm
(x8) (x8)
H
I
C
Hole Plastic
Cap
Washer
(x2)
(x1) (x2)
F G
Screw Security
M4x16mm Screw
(x8) (x2)
J K L
Screw 4mm 3mm
M6x12mm Allen Key Allen Key
(x2) (x1) (x1)
Installation Guide
AWM-LR
REQUIRED TOOLS
• Phillips Head Screwdriver
WEIGHT RANGE
2 - 7
kg
(4.5 - 15 )
lbs
per monitor
Monitor weight should be
within the weight range of
all modular elements that
make up the complete
monitor mounting solution.
AWM-LR Page 1 of 4