Table of Contents
Advertisement
2-18. KEY-FPC ASSY (KEY1)
3 Slide the hold knob in the direction
of the arrow.
When installing the hold knob,
align the switch and the hold knob.
hold knob
switch
Note 1: When affixing the power button block to the button assy,
The shapes of the power button
and button assy match.
bottom
side
1 Peel the power button block
5 screw (NDS-EL)
(M1.4
2.5)
top side
NW-A35/A35HN/A36HN/A37HN
check the shapes in the dotted rectangles in the figures below,
and install in the correct orientation.
OK
power button
adhesive sheet
(button VOL)
2 power button block
adhesive sheet
(button VOL)
off of the button assy block.
4 hold knob
hole
hole
bottom side
NG
The shapes of the power button
and button assy do not match.
power button
5 screw (NDS-EL)
(M1.4
2.5)
6 button assy block
top side
hole
hole
7 KEY-FPC assy (KEY1)
Note 2: When installing the KEY-FPC assy,
align the two holes of the button assy
and KEY-FPC assy.
top
side
27
Advertisement
Table of Contents
