Table of Contents
Advertisement
NW-A35/A35HN/A36HN/A37HN
Note: Follow the disassembly procedure in the numerical order given.
2-2.
BOTTOM CAP
top side
hole
2 BTM cap adhesive sheet
2-3.
TOP CAP
bottom side
hole
2 top cap adhesive sheet
16
front side
hole
boss
front side
hole
boss
1 Insert thin-tipped tweezers into the hole of the
headphone jack, and lift up the bottom cap block
while peeling off the BTM cap adhesive sheet.
Note 1: When using tweezers, work carefully
so that the bottom cap is not damaged.
boss
BTM cap adhesive sheet
3 bottom cap
Note 2: When installing the bottom cap,
bottom side
align the two bosses and two holes.
1 Insert thin-tipped tweezers into the edge
(short side) of the top cap, and lift up the
top cap block while peeling off the top cap
adhesive sheet.
Note 1: When using tweezers, work carefully
boss
top cap adhesive sheet
3 top cap
Note 2: When installing the top cap, align
top side
the two bosses and two holes.
bottom cap
bottom side
tweezers, etc.
so that the top cap is not damaged.
top cap
tweezers, etc.
top side
Advertisement
Table of Contents
