Table of Contents
Advertisement
5-2-10. Playback user fi le 1 (Play user fi le-1)
Note: Not used for the servicing.
5-2-11. Playback user fi le 2 (Play user fi le-2)
Note: Not used for the servicing.
5-2-12. Playback user fi le 3 (Play user fi le-3)
Note: Not used for the servicing.
5-2-13. Playback user select (Play user select)
Note: Not used for the servicing.
5-2-14. Hi-Res output (Output HiRes check)
It can be output the "Sampling rate: 192 kHz/Frequency: 1 kHz
(L/R-ch)/Bit rate: 32 bit" audio signal for the Hi-Res check.
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 29)
2. Press the [+]/[–] keys to select the "Audio", and press the [
or [
] key to enter the minor item.
>
3. Press the [+]/[–] keys to select the "Output HiRes check".
4. Press the [
] key, the audio signal output screen is displayed.
u
Screen display
Audio HiRes
(AUD HIRS command)
output
[HeadPhone]
volume
[ 90]
play time
[60]
5. Press the [
] key, and output an audio signal using the set-
u
tings selected.
6. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
u
Item of key input settings
NW-A35/A35HN/A36HN/A37HN
5-3. Video (Video)
5-3-1. LCD panel check (LCD panel check)
It can be check the LCD screen display.
Procedure:
]
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 29)
2. Press the [+]/[–] keys to select the "Video", and press the [
or [
] key to enter the minor item.
>
3. Press the [+]/[–] keys to select the "LCD panel check".
4. Press the [
] key, the color bar screen is displayed.
u
5. In step 4 state, each time the [
display changes in the following order.
Color bar (default) t All black t All red t All green t
All blue t All white t Maximum drawing size confi rmation
t diagonal gradation (red) t diagonal gradation (green) t
diagonal gradation (blue) t diagonal gradation (white) t
Color bar ...
Maximum drawing size confi rmation:
All blue (All sides are red) is displayed. Whether red in all
sides is seen is confi rmed.
6. In step 5 state, each time the [
brightness changes in the following order.
brightness 120 (default) y brightness 180 y brightness 240
y brightness 1 y brightness 60 y brightness 120 ...
7. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
Screen display
Diagnosis APP
[ver X.XX.XX]
Video
LCD panel check
] key is pressed, the screen
u
]/[
] key is pressed, LCD
.
>
]
u
35
Advertisement
Table of Contents
