Table of Contents
Advertisement
5-15-8. Color variation check (Color variation)
It can be check the information of the WALKMAN main unit body
color.
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 29)
2. Press the [+]/[–] keys to select the "Others", and press the
[
] or [
] key to enter the minor item.
u
>
3. Press the [+]/[–] keys to select the "Color variation".
4. Press the [
] key, the information screen is displayed.
u
Screen display
Color variation
(OTR CLVR command)
Color variation
[BLACK]
5. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
5-15-9. Sleep timer setting (Sleep timer)
It can be setting the shutdown timing of the sleep timer.
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 29)
2. Press the [+]/[–] keys to select the "Others", and press the
[
] or [
] key to enter the minor item.
u
>
3. Press the [+]/[–] keys to select the "Sleep timer".
4. Press the [
] key, the setting screen is displayed.
u
Screen display
Sleep timer
(OTR OFFT command)
Sleep timer
[Normal]
>>> set
5. In step 4 state, each time the [
sleep timer setting is select. (Normal/Quick)
6. Press the [
] key, and change to the selected of in step 5.
u
7. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
5-15-10. Auto sleep setting (Auto sleep)
It can be setting the information of time-out timer setting of until
the sleep state.
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 29)
BLACK
: Charcoal Black
PINK
: Bordeaux Pink
BLUE
: Viridian Blue
RED
: Cinnabar Red
YELLOW : Lime Yellow
"Normal"
or
"Quick"
]/[
] keys are pressed,
.
>
NW-A35/A35HN/A36HN/A37HN
2. Press the [+]/[–] keys to select the "Others", and press the
[
] or [
] key to enter the minor item.
u
>
3. Press the [+]/[–] keys to select the "Auto sleep".
4. Press the [
] key, the setting screen is displayed.
u
Screen display
Auto sleep
(OTR SLPT command)
Auto sleep
[Normal]
>>> set
5. In step 4 state, each time the [
time-out timer setting is select. (Normal/Quick/Long)
6. Press the [
] key, and change to the selected of in step 5.
u
7. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
5-15-11. EU volume regulation check (EU Vol regulation)
Note: Not used for the servicing.
5-15-12. Console ON/OFF check (Console ON/OFF)
Note: Not used for the servicing.
5-15-13. Printk ON/OFF check (Printk ON/OFF)
Note: Not used for the servicing.
5-15-14. MSC connection control (MSC control)
It can be switched status of the MSC connection/disconnection.
Procedure:
1. Enter the test mode.
(Refer to "2. SETTING THE TEST MODE" on page 29)
2. Press the [+]/[–] keys to select the "Others", and press the
[
] or [
] key to enter the minor item.
u
>
3. Press the [+]/[–] keys to select the "MSC control".
4. Press the [
] key, the control screen is displayed.
u
Screen display
MSC control
(OTR MASS command)
MSC control
[disconnect]
>>> set
5. In this state, each time the [
connection/disconnection is select. (connect/disconnect)
6. Press the [
] key, and switched the selected MSC connec-
u
tion/disconnection status of in step 5.
7. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
"Normal"
or
"Quick"
or
"Long"
]/[
] keys are pressed,
.
>
"disconnect"
or
"connect"
]/[
] keys are pressed, MSC
.
>
43
Advertisement
Table of Contents
