MG ZS EV Owner's Manual page 221

Hide thumbs Also See for ZS EV:

page of 224

/ 224
Contents
Table of Contents
Bookmarks

Table of Contents

OPERATION / PROCESSES FOR PERIODIC SERVICE

SCHEDULE

Check the level and concentration of coolant, and add to the

standard level as necessary.

Check the status of A/C system pipeline such as the compressor,

the cooling pipeline and the condenser, and clean relevant surfaces

as necessary.

Check the status of brake vacuum booster and hose.

Check the drive motor mounting bracket.

Vehicle Bottom

Check the appearance of high-voltage connector and if it is fitted

properly; check the surface of high-voltage connector for damage

and if it is fitted in place.

Check the high-voltage harness for mutual interference, wear or

damage.

Check the appearance of vent valve for damage, and check the

marking for fitting to see if it is moved.

Check the status of manual service switch to ensure reliable

mounting and clean up the dust on the surface.

Check the mounting position of the cooling water pipe clip to

ensure reliable sealing.

Check the marking for fitting the mounting bolt to see if it is moved

and ensure the bolts are fastened.

Check the appearance of housing (including the bracket) for crack

or deformation.

Check the appearance of high-voltage battery pack grounding wire

and replace it as necessary.

Symbol Abbreviation : R - Replace • I - Inspect- Top up if require-Adjust-Clean-Refill. Check the coolant level and top up as required, replace if it is contaminated/discoloured or there is sludge formation.

** Tightening of underbody fasteners, door adjustments and functional checks of all the systems during every service is mandatory - Check and Rectify.

Periodic Maintenance - Service Schedule-Z Car Full Electric

1 Month

6 Months

Replacement

Frequency: Km /

Year whichever is

earlier

80K KM/ 4 Years*

Inspection only