Table of Contents
Advertisement
Multi-Collision
Brake
(MCB)
The MCB function will automatically apply
the brake to reduce the vehicle speed and
improve the vehicle stability after a collision.
It is designed to reduce the risk of re-collision
caused by the uncontrolled movement of the
vehicle after a collision.
The MCB will be activated when the following
conditions are all met at the same time:
•
In case of vehicle collision, the seat belts
or airbags are deployed.
•
The vehicle speed is less than 60 km/h.
•
The steering wheel has not been turned
in excess of 180°.
•
SCS is fault free.
The MCB function will not trigger if the
driver strongly applies the accelerator pedal
after a collision. The vehicle will exit the
braking state if the driver strongly applies the
accelerator pedal after the MCB function is
triggered.
System
Note:
The
MCB
guarantee the deceleration of the vehicle
in all cases of collision because the
collision process may lead to malfunction
or failure of some parts, thus affecting the
normal operation of the function.
function
cannot
Starting & Driving
4
119
Advertisement
Table of Contents
