Using The Attachments; Assembling The Vacuum Cleaner; Using The Vacuum Cleaner - BRAYER BR4225 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
8
EN

USING THE ATTACHMENTS

Floor/carpet brush (1)
When using the brush (1) set the switch (2) to the
necessary «FLOOR/CARPET» position (pic.1).
Combined crevice nozzle (25)
The combined crevice nozzle (25) can be used for
cleaning radiators, crevices or space between cushions,
as well as for collecting dust from furniture surface. The
pile on the brush prevents damage of polished furniture
surface. While room cleaning set the brush to the required
position.
Furniture upholstery brush (26)
Use the attachment (26) to clean the furniture upholstery.

ASSEMBLING THE VACUUM CLEANER

Attaching and removing the flexible hose (7)
• Insert the flexible hose (7) ending (8) into the air inlet
(10) until the locks (9) catch.
• To remove the flexible hose (7), press the locks (9) and
detach the ending (8) from the air inlet (10) (pic.2).
Attaching the telescopic pipe (4) and the attachments
• Attach the telescopic extension pipe (4) to the flexible
hose handle (5).
• Extend the lower part of the telescopic extension pipe
(4) to the required length, having preliminarily pressed
the lock (3) (pic. 2).
• Choose the necessary attachment – floor/carpet brush (1),
crevice nozzle (25) or upholstery attachment (26) – and
attach it to the telescopic extension pipe (4).
• You can attach the attachments (25 and 26) to the flexible
hose handle.
ATTENTION!
• Do not use the vacuum cleaner in places where aerosols
are used or sprayed and in proximity to highly inflammable
liquids, do not use the vacuum cleaner in the places where
such liquids are stored.
• The vacuum cleaner is not intended for collecting water
or any other liquids; do not use it for collecting burning or
smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of
plaster, concrete, flour or ashes.
• Take sharp objects away from the floor before cleaning to
prevent damage to the unit.
• If the suction power of the vacuum cleaner decreases
rapidly while cleaning, switch it off immediately, unplug it
and check the telescopic pipe (4) or the flexible hose (7)
for obstruction. Remove the obstruction, after that you can
resume cleaning.

USING THE VACUUM CLEANER

Attention!
Switch the vacuum cleaner on only with the dustbag (20 or
disposable paper dustbag 27) and the inlet (19) and outlet
HEPA (24) filters installed.

Advertisement

Table of Contents
loading

Table of Contents