Using The Attachments; Assembling The Vacuum Cleaner; Using The Vacuum Cleaner - BRAYER BR4206 Instruction Manual

USING THE ATTACHMENTS

Floor/carpet brush (15)
When using the brush (15) set the switch (16) to the
necessary «FLOOR/CARPET» position (pic. 2).
Combined crevice nozzle (14)
The combined crevice nozzle (14) can be used for
cleaning radiators, crevices or spaces between
cushions, as well as for collecting dust from furniture
surface. The pile on the brush prevents damage of
polished furniture surfaces. While cleaning, set the
brush to the required position.

ASSEMBLING THE VACUUM CLEANER

Attaching and removing the flexible hose (19)
• Insert the flexible hose (29) ending (23) into the air
inlet (24) until the locks (22) catch.
• To remove the flexible hose (29), press the locks (22)
and detach the ending (23) from the air inlet (24)
(pic.3).
Attaching the telescopic pipe (18) and the
attachments
• Attach the telescopic extension pipe (18) to the
flexible hose handle (20) (pic. 4).
• Extend the lower part of the telescopic extension
pipe (18) to the required length, having preliminarily
pressed the lock (17) (pic. 5).
• Choose the necessary attachment: floor/carpet brush
(15), combined crevice nozzle (14) and attach it to
the telescopic extension pipe (18).
• You can attach the combined crevice nozzle (14) to
the flexible hose handle (20).
ATTENTION!
• Do not use the vacuum cleaner in places where
aerosols are used or sprayed and in proximity to
highly inflammable liquids, do not use the vacuum
cleaner in the places where such liquids are stored.
• The vacuum cleaner is not intended for collecting
water or any other liquids; do not use it for collecting
burning or smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of
plaster, concrete, flour or ashes.
• Take sharp objects away from the floor before
cleaning to prevent damage to the unit.
• If the suction power of the vacuum cleaner decreases
rapidly while cleaning, switch it off immediately,
unplug it and check the telescopic pipe (18) or
the flexible hose 19) for obstruction. Remove the
obstruction, after that you can resume cleaning.

USING THE VACUUM CLEANER

The dust bin (13) is equipped with the cyclonic filter (27)
which sieves out garbage and dust from the ingoing
air, and the inlet (11) filter fully retains the finest dust
particles.
EN 9