Set Speed Units - Navman R300 User Manual

NAVMAN

4.1.7 Set speed units

Set units for speed (km/h or mph).
Access this option
If necessary, press and hold
setup. Press
above.
To set speed units
1) Press to start editing (speed units flash).
2) Press or
3) Press to stop editing.
4) Press to go to the next option, or hold
Note: Distance and altitude are displayed in units that correspond
to user selected speed units. For example, if you select speed units
'km/h', then distance is displayed in 'km' and altitude in 'm'.
km km/h
speed units
repeatedly until the screen appears as shown
to select km/h or mph.
R300
SYSTEM
to turn the power on and enter
R300 – Setup
m
SET
to leave setup.
1-15