Page 3
NAVMAN W300 – English W300 USER GUIDE English W300...
Page 4
NAVMAN Welcome Welcome Navman’s GPS Sport.Tool 300 series provides an affordable and reliable way to track and store a variety of personal performance indicators. Please read this guide carefully and familiarize yourself with the interface and functions, as well as the intended use and limitations of the Navman W300 GPS Sport.Tool.
NAVMAN Content 1.0 General information 1.1 Checklist 1.2 Care and maintenance 1.3 Water resistance 1.4 Changing the battery 2.0 Navman W300 interface 2.1 Button functions 2.2 Display screen 3.0 Getting started 3.1 Be outdoors 3.2 Fit the W300 3.3 Startup 3.3.1 Enter setup...
CAUTION: Please ensure battery cover is in place during cleaning. Store the W300 away from direct sunlight or extreme heat sources. (Remove battery before storing for an extended period.) 1.3 Water resistance The Navman W300 GPS Sport.Tool is water resistant. W300 NAVMAN...
NAVMAN 1.4 Changing the battery Always shut down the W300 before changing the battery. Note: All system settings, and the calculated data that was stored at the last controlled shutdown*, are retained when the battery is removed. This information persists indefinitely until updated or reset.
W300 – Interface 2.0 Navman W300 interface 2.1 Button functions There are two control buttons, pressed separately or together to turn the unit on and off, cycle through modes, and select mode options. Throughout this guide the button icons are used as follows:...
NAVMAN 3.0 Getting started 3.1 Be outdoors The W300 is not intended for operation indoors or under water as it uses Global Positioning System (GPS) satellites to get time and date information, and to calculate distance and speed. For best results, always use the W300 outdoors with an unobstructed view of the sky.
When starting directly into normal operation, the W300 will start in the mode it was in at last shutdown. (Speed mode is always displayed first when starting normal operation after leaving setup.) For details about normal operating modes see Section 5.0. W300 1-10 NAVMAN counter counter before...
NAVMAN 4.0 Setup 4.1 Setting options Press and hold to turn the power on and enter setup. Press repeatedly to step through the setting options. Setting options are accessed in the order shown below. See subsequent sections for details about editing settings.
3) Press to stop editing. 4) Press to go to the next option, or hold W300 1-12 NAVMAN time format SYSTEM to turn the power on and enter to leave setup. date format SYSTEM to turn the power on and enter...
NAVMAN 4.1.3 Set button beep status Set beep ON or beep OFF. When beep is ON, an audible ‘beep’ will sound when buttons are pressed. Access this option If necessary, press and hold setup. Press repeatedly until the screen appears as shown above.
3) Press to stop editing. 4) Press to go to the next option, or hold W300 1-14 NAVMAN user weight SYSTEM to turn the power on and enter to increase repeatedly to decrease value by 1 to leave setup.
NAVMAN 4.1.7 Set speed units Set units for speed (km/h or mph). Access this option If necessary, press and hold setup. Press repeatedly until the screen appears as shown above. To set speed units 1) Press to start editing (speed units flash).
(press and hold set time display backward quickly). 3) Press to stop editing. 4) Press to go to the next option, or hold W300 1-16 SYSTEM to turn the power on and enter current date SYSTEM to exit setup. NAVMAN...
NAVMAN 4.1.9 Editing settings (overview) settings edit set (12hr) edit set (31-12) edit beep edit set units (kg) edit user (weight) edit set units (kcal) edit set units (km/h) edit set offset W300 W300 – Setup editing details set 12hr...
Calories shows calories burned Clock shows current time and date GPS time is displayed unless you set local time, see Section 4.1.8. Timer shows session* time (*See glossary.) W300 1-18 NAVMAN Speed AVG Odometer Clock Calories...
NAVMAN 5.1.1 Speed mode This mode lets you monitor session distance, current speed and pace. session distance To access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above.
Press repeatedly until the screen appears as shown above. While in Calories mode • Press and hold to clear calories only. • Press to go to the next mode W300 1-20 NAVMAN total calories kcal...
NAVMAN W300 – Normal operation 5.1.5 Clock mode Clock mode shows the current time and date. (Time is only displayed while GPS satellite signals are available. By default, GPS time is displayed. See section 4.1.8 for instructions on setting local time.)
NAVMAN W300 – Normal operation 5.1.6 Timer mode Timer mode lets you monitor session time. session time Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above.
After factory default settings have been restored, when the W300 is next turned on you will need to enter setup if you want to display local time or adjust other setting preferences. W300 1-24 NAVMAN five times...
8.0 Copyright This publication and its contents are proprietary to Navman and are intended solely for the use of its clients to obtain information about the operation of Navman Sport.Tool products, it should not be used or distributed for any other purpose.
Navman NZ Limited (Navman) neither owns nor maintains the Global Positioning Service (GPS). Navman assumes no responsibility for the quality or continuity of the GPS service. Navman will not accept the return of products where dissatisfaction results from any changes to the GPS service.