Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
NAVMAN
Setting options
Press and hold
Press
repeatedly to step through the setting options.
Press both buttons together (
a setting option.
While editing, press
or increase/decrease values. Press and hold the appropriate button to
increase/decrease values quickly.
Set (12hr)
lets you set 12hr or 24hr time format
Set (31-12)
lets you set dd-mm or mm-dd date format
Calc up
When 'calc up' is «ON» the A300 calculates data for all
movement (uphill and downhill). When 'calc up' is «OFF» the
A300 calculates information for downhill movement only.
Beep
When beep is «ON» a beep will sound when the buttons are
pushed.
Set units (km/h)
lets you set speed units to «km/h» or «mph»
Distance and altitude are displayed in units corresponding to the speed
units, i.e. if you choose «km/h» for speed units, then distance is displayed
in «km» and altitude in «m».
Set offset
lets you adjust the A300 to display local time
The date is displayed to ensure that time adjustments are made in the
correct direction, i.e. both correct time and correct date should be
displayed.
GPS signals must be obtained to set local time.
Press and hold
to enter setup
) to start or stop editing
or
repeatedly to step through selectable states,
to leave setup
A300
A300 — Settings
Advertisement
Table of Contents
Related Manuals for Navman A300
Summary of Contents for Navman A300
-
Page 1: Setting Options
Set (31-12) lets you set dd-mm or mm-dd date format Calc up When ‘calc up’ is «ON» the A300 calculates data for all movement (uphill and downhill). When ‘calc up’ is «OFF» the A300 calculates information for downhill movement only. - Page 2 (31-12) edit Calc up edit beep edit set units (km/h) edit set offset A300 A300 — Settings editing details set 12hr set (12hr) set 24hr set 31-12 set (31-12) set 12-31 Calc up ON Calc up Calc up OFF...
-
Page 3: Normal Operating Modes
Timer Recall lets you recall stored lap data. Repeatedly pressing lap data starting from the last stored lap, then lap 1, 2, 3 etc. Press and hold to shut down the A300 A300 A300 — Modes recalls... - Page 4 Speed (AVG) Speed (MAX) Odometer Altitude Clock Timer Timer recall A300 A300 — Modes operating details store current lap data clear all* session data store current lap data clear all* session data store current lap data clear max speed only...
- Page 5 A300 QUICK START GUIDE...
- Page 6 NOW YOU KNOW. A300...
-
Page 7: Get Ready
D-ring clockwise to seal. Fit the A300 The A300 is designed to be worn on the left upper arm. You may wish to adjust some of the settings prior to fitting. Be outdoors... -
Page 8: Enter Setup
For details about system settings see over page or consult User Guide. Press and hold to leave setup After leaving setup, the A300 automatically starts normal operation displaying the speed mode first. A300 (as shown above) are pressed... -
Page 9: Start Normal Operation
Start normal operation Press to start normal operation When starting directly into normal operation A300 will start in the mode it was in at last shutdown. The A300 automatically operates whenever you are moving and pauses operation while you are stationary. Modes are...