Edit User Weight; Set Energy Units - Navman R300 User Manual

R300 – Setup

4.1.5 Edit user weight

Edit the user weight value (used for calculating calories burned).
Access this option
If necessary, press and hold
setup. Press
above.
To edit user weight
1) Press to start editing (weight value flashes).
2) Press repeatedly to increase value by 1 (hold
values quickly), or press
(hold to decrease values quickly).
3) Press to stop editing.
4) Press to go to the next option, or hold

4.1.6 Set energy units

Set energy units (kcal or kJ) for displaying energy (calories)
burned when using Cal mode (see Section 5.1.5).
Access this option
If necessary, press and hold
setup. Press
above.
To set energy units
1) Press to start editing (energy units flash).
2) Press or
3) Press to stop editing.
4) Press to go to the next option, or hold
1-14
repeatedly until the screen appears as shown
repeatedly to decrease value by 1
repeatedly until the screen appears as shown
to select kcal or kJ.
R300
user weight
kg
SYSTEM
to turn the power on and enter
kcal
SYSTEM
energy units
to turn the power on and enter
NAVMAN
SET
to increase
to leave setup.
SET
to leave setup.