On main roads, the distance to an exit calculated by the Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while the Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road.
Page 3
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of the Navman that causes or contributes to death, injury or property damage or that violates any...
Getting to know your Navman ...8 Components ...8 How do I get started?...10 How do I turn my Navman on for the first time? ...10 How do I adjust the volume?...13 How do I monitor the battery status?...13 How do I turn my Navman off?...14 What are the main screens I will use?...15...
Page 5
Making a phone call to a contact in your phonebook...61 Receiving a phone call...61 Switching calls between your mobile phone and your Navman (hands-free) ...61 How do I view my call history? ...62 How do I view my SMS/text messages? ...63 Receiving a message...63...
Page 6
Toolbar ...111 How do I use NavAlbum?...112 How do I copy NavPix or albums from my Navman to NavAlbum? ...112 How do I transfer pictures from NavAlbum to my Navman?...112 How can I view and edit pictures or albums on my computer?...112 What else can I do with pictures and albums on my computer?...113...
S-SERIES Welcome Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference.
Battery Indicator Indicates the level of battery charge: Turns the Navman on or off. For more information, see” How do I turn my Navman off?” on page 14. Connection socket for GPS MMCX External Antenna (not included). To access the socket, gently lift the rubber cover.
Page 9
Slot for memory card. The memory card must be inserted with the label facing the front of your Navman. For more information, see “How do I insert a Memory Card?” on page 126. Note: Memory cards may be sold separately.
Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a GPS connection. For more information about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD.
Page 12
To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 84). Read the warning message The Safety Agreement screen will display after you have selected your preferred language.
To charge your Navman using your computer, plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug the small end into...
Power preference screen. For more information, see "Power" on page 88. Note: If battery power is very low, your Navman will enter a standby mode whether you have set a pre-determined period of time or not.
The Main Menu can be accessed from the map screens by tapping bottom of any screen. Note: The Main Menu screens may differ from those displayed above, depending on your Navman model. Map screens There are five map screens used to view the route to your destination:...
Note: Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you may need to purchase an external antenna for your Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a GPS connection.
S-SERIES How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ...
This case study will show you how to enter an address and how to navigate to it. The address we will be using in this example is: Note: The below address is fictitious and used as an example only. 1 Navman Street Horley Surrey RH6 8LD, United Kingdom.
Page 19
S-SERIES 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. From the Destination Search screen, tap The Select a map screen will display.
As you specify each part of the address, it will display at the top of the screen. The available options will change to reflect the parts of the address still to be completed. , then scroll to see more search results. S-SERIES...
Page 21
S-SERIES Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
This case study will show you how to set a multi-stop trip by entering multiple waypoints. The address we will be using in this example is: Note: The below address is fictitious and used as an example only. 12 Navman Street Horley Surrey RH6 8LD United Kingdom.
Page 23
S-SERIES Tap Add. The Add to Trip Menu will display. Tap Address. The Destination Search screen will open. Note: You can also add waypoints using favourites, recent destinations, POI locations and NavPix. 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed.
Page 24
From the Destination Search screen, tap Street Address. The Keyboard screen will display. Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
Page 25
S-SERIES If you want to ... navigate to your selected destination change the order of your waypoints delete all waypoints delete one waypoint save the multi-stop trip as a favourite Then ... The Preview screen will display. The 3D Map screen will display the calculated route.
How do I skip a waypoint during a multi-stop trip? To skip a waypoint during a multi-stop trip, complete the following: Tap the map. The Map Menu will display. Tap Route, then Skip Waypoint. The next waypoint will be skipped and the route recalculated to the following waypoint. S-SERIES...
S-SERIES How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as petrol stations, parks, beaches and museums.
Page 28
Tip: The list of categories is divided into Enabled Categories which are set to display an icon on the map screens, and Other POI Categories which will not display an icon. 4. Search for a POI Either tap Search by name to search in all POI categories, or select a category from the list. The Keyboard screen will display. S-SERIES...
Page 29
S-SERIES Use the Keyboard screen to search for Waterloo Railway Station as your destination, then tap the search result. The Preview screen will display. Complete one of the following: If you want to ... navigate to your selected destination view your position on the map screen...
Then ... save as a Favourite tap Save as Favourite. The favourite is saved. The Preview screen will display. save as My Home tap Save as My Home. The favourite is saved as My Home. The Preview screen will display. S-SERIES...
Tap the Favourite destination you want to travel to. The Preview screen will display. Your Navman will calculate the route from your current location. The 3D Map screen will display. How do I navigate to My Home? If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard.
The favourite is deleted. The Favourite Destinations screen will display. Then ... tap Save. The favourite is saved. The Favourite Preview screen will display. tap Save as My Home. The favourite is saved as My Home. The My Home Preview screen will display. S-SERIES...
S-SERIES How do I navigate to a recent location? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent locations. Tap a recent location. The Preview screen will display.
Waypoint, Distance to Waypoint and ETA at Waypoint. The name of the street you are located on Speed warnings Active POIs. Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). S-SERIES...
Page 35
To zoom in, tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 64. Bluetooth and phone connection indicator. The icon is grey when Bluetooth is on, but a phone has not been paired.
Your current position is marked with Cancel route Cancels your current route. The name of the street you are located on Speed warnings Active POIs. Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). S-SERIES...
Page 37
To zoom in, tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 64. Bluetooth and phone connection indicator. The icon is grey when Bluetooth is on, but a phone has not been paired.
Traffic Overview screen Depending on your Navman model traffic information may not be available or may require a traffic cradle. The Traffic Overview screen displays a general overview of the traffic situation on your route, including all events in the immediate vicinity.
Page 39
Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 64. Bluetooth and phone connection indicator. The icon is grey when Bluetooth is on, but a phone has not been paired.
Note: The Status Bar is replaced by current Traffic events, when Traffic is enabled. For more information, see “Traffic” on page 64. Current position Your current position is marked with The name of the street you are located on Speed warnings Active POIs. ; if visible. S-SERIES...
Page 41
To zoom in, tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 64. Bluetooth and phone connection indicator. The icon is grey when Bluetooth is on, but a phone has not been paired.
The Map button allows you to cycle through different map screens. The name of the street you are located on Speed warnings Active POIs. Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). S-SERIES...
Page 43
Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 64. Bluetooth and phone connection indicator. The icon is grey when Bluetooth is on, but a phone has not been paired.
The following options are available via the Map Menu: Menu Option Description Navigate To Calculates a route from your current location, if your Navman has a GPS fix. Show Details Displays the Preview screen from where you can: View details of the location...
S-SERIES How do I avoid an area? Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail.
Once the route has been determined, you can demonstrate the route by completing the following: Tap the map screen to display the Map Menu. Tap Route. The Route submenu will display. Tap Demonstrate. The 3D Map screen will display the calculated route in Route Demonstration mode. S-SERIES...
S-SERIES How do I view my route statistics? The Navman provides information on your: distance travelled average speed maximum speed time taken for trip stationary time. Trip information is presented in two different ways. These are: information for the current trip information for all trips to date, or since the tripmeter was last reset.
A Warning dialog box will display. tap Yes to reset. The Tripmeter - Global screen will display. Then ... to display the Tripmeter – Global screen. tap Stop Logging. tap Stop Logging. tap Delete Logs to remove the logs. S-SERIES...
Your NavPix can be stored on either the Navman internal memory or a memory card and can be viewed in full screen mode. To download new NavPix or share your NavPix with other users, visit www.navpix.net.
Viewfinder Displays the image as it will appear as a NavPix. GPS icon- displays indicate the reception strength of a GPS fix, on top of your Navman. green when a GPS fix is established and displays between one and four S-SERIES when a GPS fix is unavailable.
S-SERIES How do I customize camera preferences? The camera has lighting and brightness settings which you can customize before taking a NavPix. Lighting options To view the Viewfinder screen, press From the Viewfinder screen, tap The range of lighting options will display.
Navman internal memory or on your memory card. Note: When you take a NavPix, it is always saved to the NavPix album on the Navman internal memory. You can then copy it to another album or a memory card.
Page 53
How do I copy NavPix to my memory card? NavPix can be copied from the albums on your Navman internal memory to your memory card and vice versa. Note: The first time a NavPix is copied to your memory card, a folder will be created on the memory card called NavPix.
NavPix. Allows you to edit the name of the NavPix using the Keyboard screen. Deletes a NavPix from the album on your Navman or memory card. Your route will be calculated and displayed on the 3D Map screen. Note: This button is only available if this is a NavPix with embedded GPS coordinates.
Page 55
When the description is complete, tap The NavPix Details screen will display, with the new description under the thumbnail. Note: You can only edit names of NavPix taken via your Navman. Then ... The NavPix will rotate 90 degrees anticlockwise each time tapped;...
How do I navigate to a NavPix? Your Navman contains preinstalled NavPix that you can navigate to. If you have not yet navigated to a NavPix, three of the preinstalled NavPix will display on the Go To NavPix screen. Otherwise, three of your recently used NavPix are displayed.
S-SERIES How do I save a NavPix to a favourite? Note: When a NavPix is saved to an existing favourite, only the images, and not the GPS coordinates, are associated with the favourite. From the Album screen, select and tap a NavPix.
A new category to create a custom POI category. The keyboard screen will display. Enter a name for your POI, then tap The Select POI Categories screen will display the new POI category. select the POI Category from the list, then tap S-SERIES...
Via Memory Card NavPix can be copied from the albums on your Navman internal memory to the My Pictures folder on your memory card. The first time a NavPix is copied to the memory card, the following folders will be created: E:\My Documents\My Pictures, where “E”...
For complete list of supported phones, visit Note: Before you can use Bluetooth for the first time, you must pair your mobile phone with your Navman. Then each time you use it, you must ensure that the Bluetooth wireless feature on your mobile phone is turned on before you begin pairing.
When you receive a call, the Incoming call screen will display. to answer the call or to mute the call. to end or cancel the call. Switching calls between your mobile phone and your Navman (hands-free) Complete the following: If you want to... make and receive calls through your...
How do I view my call history? From the Call log screen you can view a list of Incoming Calls, Outgoing Calls and Missed calls. Note: If the call log does not display, tap your Navman during the transfer. Icon Description...
Sent messages to scroll through the messages. Select a message to view the full message. Note: You cannot send messages via your Navman. Receiving a message When you receive a message, the Message screen will display. to return to the previous screen.
The TMC status is Your Navman or Traffic module is connecting to the TMC service. Your Navman or Traffic module cannot receive TMC data. This may be due to poor radio coverage in the local vicinity. You are in a country that is not supported by the Navman Traffic module.
Traffic preferences?" on page 79. When travelling through an area in which you can receive traffic status, your Navman will decode these events and display them on-screen. An icon will display at the event location on the map screens, and an audible warning is given if an event is on your route.
How do I view a list of all events on my route? Your Navman creates a list of events as they are received, which is displayed on the Event List screen. This screen can only be viewed if the TMC icon is...
S-SERIES How do I view traffic details? There are several ways to view details of an event received by your Navman. Choose one of the following: Location From any of the screens used to view your route From the Traffic Overview screen...
How do I automatically avoid all traffic and clearance events on my route? To automatically avoid all traffic and clearance events see Traffic preferences on page 85. is available; tap to accept the new is available; tap to accept the new route. S-SERIES...
A detour / re-route could not be calculated. Description Your Navman is calculating a new route. During calculation, the % complete will display. Note: Exiting this screen before the new route is calculated will cancel the operation. A detour has been calculated.
What can I customize? There are various customization options available to enhance your navigation experience. The Preferences menu screens are accessed by pressing To move forward through the Preferences screens, tap To revisit the previous screen, tap S-SERIES...
S-SERIES Route Options You can enhance your navigation experience by modifying aspects of your route and route calculation. Route Calculation 1/4 Complete the following: If you want to... change the route type change the preference for motorways Your preferences are automatically saved.
Ferry routes check box in the Avoid column. select the Ferry routes check box in the Warn column. The warning will display at the start of every trip containing ferry routes. S-SERIES...
Your preferences are automatically saved. Then... select the Warn me not to operate my Navman while driving check box. select the Alert me when my speed exceeds check box. select your preferred speed from the Speed box.
GPS log of your trips select the Enable GPS data logging check box. record mileage that can be select the Enable trip recording check box. imported into NavDesk to create expense reports Your preferences are automatically saved. S-SERIES...
S-SERIES Map Display You can change the look and behaviour of the Map screens by customizing the Map Display preferences. Map Display 1/3 Complete the following: If you want to... change the map colour scheme set the screen contrast to automatically adjust...
Keep North at top of 2D Map screen check box. Note: If not selected, the direction you are travelling in will display at the top of the 2D Map screen. select the Show no-entry road signs check box. S-SERIES...
S-SERIES Select Map 3/3 Complete the following: If you want to... use maps from a different continent Your preferences are automatically saved. Then... select a different continent from the maps you are currently using. When selected, the maps for the new continent will load and the 3D Map screen will display.
POI category icon for display on the map screens Your preferences are automatically saved. Then... Tap Turn All On. Tap Turn All Off. select the required POI category checkbox; repeat until all required categories are selected. S-SERIES...
S-SERIES Volume Complete the following: If you want to... increase or decrease the volume hear a tone when you tap the touch screen hear keyboard characters spoken to Your preferences are automatically saved. Then... move the Volume slider towards High to increase the volume.
Screen Brightness slider towards Dim to decrease screen brightness. Warning: Your Navman can heat up when the Brightness scale is set above 70% - i.e., when more than seven rectangles are coloured - therefore, use lower brightness whenever acceptable.
NavDesk (Custom POIs). You may also be able to set warnings to certain POI categories that were preinstalled on your Navman or available by subscription, such as Safety Cameras. If you have a route set, the warnings will occur when you are a certain distance (set by the Warning Distance preference) from the POI on your route.
Complete the following: If you want to... reset the GPS Description No signal. A valid signal, but not being used to fix your position. A valid signal being used to fix your position. Then... tap Reset GPS. S-SERIES...
S-SERIES Setting your GPS mode Complete the following: If you want to... use GPS use WAAS use EGNOS Note: WAAS - Wide Area Augmentation System is a navigation system developed for civil aviation by the Federal Aviation Administration (FAA), a division of the United States Department of Transportation (DOT).
Language box and tap Yes. Your language preference is saved and the map screen is displayed. select your preferred voice scheme from the Voice Guidance box. Note: Only voice schemes that are compatible with the chosen language are displayed. S-SERIES...
S-SERIES Traffic You can view your current traffic system status and change options by customizing the traffic preferences. Traffic System Status From the Traffic Overview screen: The Tuner section displays the name and frequency of the radio station currently being used to receive traffic event information.
Note: Event icons will still display on the 3D and 2D Map screens. select the Only notify me about events on my route check box. select the Only notify me if a detour is recommended check box select the Automatically accept recommended detours check box. S-SERIES...
S-SERIES Select event sorting type Complete one the following: If you want to ... sort events by distance sort events by road name sort events by age only see events that occur on your route Your preferences are automatically saved.
Power The Battery Status bar shows the percentage of power left in the Navman battery; the words External Power will display when the battery is charging from an external power source. To charge the battery, see "Internal battery" on page Error! Bookmark not defined..
Predictive text allows addresses to be searched by a single key-press for each letter, as opposed to the multiple key- presses. As you enter a letter of an address, your Navman will compare all possible combinations against the maps you have installed and determine which address you intended to type.
Units You can change the units used by your Navman by customizing the measurements preferences. Units 1/2 Complete the following: If you want to... change the time format change the distance units Your preferences are automatically saved. Only available when AU English, UK English or US English language is selected.
S-SERIES Units 2/2 Complete the following: If you want to ... change the latitude, longitude position format Your preferences are automatically saved. Then ... select either the Decimal degrees or the Degrees, minutes and seconds option.
Start-up Complete the following: If you want to... show the Tutorial when you turn on your Navman show the Language Selection screen when you turn on your Navman Your preferences are automatically saved. Then... select the Show the Tutorial checkbox.
S-SERIES Saved Info Complete the following: If you want to... delete recent locations delete favourites delete avoid areas restore factory default settings clear all settings; for example, for use in a rental car When the warning dialog box displays, tap Yes.
Bluetooth Settings Bluetooth On/Off Complete the following: If you want to... switch on Bluetooth switch off Bluetooth Your preferences are automatically saved. Then... S-SERIES...
S-SERIES Phonebook setup Complete the following: If you want to... automatically import your mobile phonebook to your Navman when connected store your phonebook on the memory card of your Navman Your preferences are automatically saved. Then... select the Import phonebook automatically check box.
SMS Setup Complete the following: If you want to... automatically import your SMS/text messages from your mobile phone to your Navman when connected automatically display new messages when they are received store your messages on the memory card of your Navman Your preferences are automatically saved.
S-SERIES Hands-free Setup Complete the following: If you want to... make and receive calls on your Navman (hands-free) by default Your preferences are automatically saved. Then... select the Hands-free startup automatically check box.
Tutorial The Tutorial displays when you turn your Navman on, unless you have cleared the Show tutorial on start-up check box. You can view the Tutorial at any other time: To prevent the Tutorial from displaying again on startup, clear the Show on start-up check box to clear it.
S-SERIES About This preference contains copyright and trademark information. Shop Demo Complete the following: If you want to... enable a shop demonstration of Smart to be played Then... tap Shop Demo on the preference screen. A default route will be demonstrated.
Check for software updates for NavDesk on your Navman (see "How do I keep NavDesk up-to-date?" on page 103). Install one or more maps on your Navman (see "How do I install maps onto my Navman?" on page 105). S-SERIES...
Navman on. The following screen will display on your Navman. If prompted to update your Navman software, follow the on-screen prompts. You are now ready to use NavDesk to install maps to your Navman. ) on the bottom of your Navman.
Application used to install and manage maps. My Subscription Information on your current subscriptions, including safety camera subscription. NavAlbum Application used to transfer NavPix from your Navman to your computer. The software enables you to: Image Search Search and download NavPix from a website.
We recommend that you regularly use NavDesk to check the Navman server for NavDesk software updates. Note: Updating software is different from upgrading software: When you update NavDesk, the latest service packs and bug fixes are downloaded from the Navman server and applied to your Navman.
Click to zoom in. A drop down list of continents that have maps available for your Navman. A list of maps on the DVD or available for purchase via the Navman store website. A list of maps installed on your Navman.
Your Navman comes with one or more pre-activated maps. You can install maps from the enclosed DVDs to a memory card or your Navman internal memory; however you may need to purchase a Map Product Key to activate the maps.
Insert a Map DVD into your computer DVD drive. The maps that are already installed on your Navman are green. The maps that are unlocked and ready to be installed to your Navman are yellow. The maps that require activation before being installed to your Navman are red.
Page 107
The selected maps will be installed and change colour to green. 10. To use your Navman, disconnect the USB cable. WARNING Do not disconnect the USB cable from the Navman USB Socket until the installed map or maps have changed colour to green.
Click My Maps. The My Maps application will display. From the My Navman panel, select the check box next to the map you want to remove. Click Remove Maps to remove the selected maps. Confirm that you want to remove the selected map when prompted.
How do I install or reinstall a Major Road Network map? Major Road Network maps can be installed to a new memory card or reinstalled to your Navman the same way detailed maps are installed. For more information, see "How do I install maps from DVD?" on page 106.
Click the View all pictures button to display all pictures stored in the NavPix library on your computer. My Navman albums Displays a list of albums stored on the Navman internal memory and on the memory card if one is inserted. Click an album to display its contents in the Album display area.
Transfer to your Navman. Click to transfer the selected NavPix to your Navman. If you are viewing NavPix in the Navman library this will display as Transfer to your computer. Click to transfer the selected NavPix to the NavPix library on your computer.
How do I use NavAlbum? Tip: Before you begin, ensure your Navman is correctly plugged into your computer: Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into...
Desktop albums section, select the album containing the NavPix you want to upload to the NavPix website. select the NavPix, right click and then select Upload to Navman. NavPix online library screen will display. Enter your Username and Password to access the NavPix website.
The warning message will display and you will be prompted to confirm your action. Your NavPix library is moved to the new location. select Warn me when permanently deleting an image from my device checkbox. select Warn me when permanently deleting an image from my library checkbox. S-SERIES...
Image Search is a NavDesk application powered by Flickr™ allowing you to download photos and import them to NavAlbum. You can then upload the photo to either the NavPix or Flickr websites, transfer photos to your Navman, export pictures to Google Earth or search for other NavPix near the longitude and latitude of your NavPix.
Report data buttons click to input report data from your Navman or export to a report (.csv). To set the trip recording preference on your Navman, see “Data Recording” on page 74. How do I input my trip data? Select Show All in the Timeframe section.
Distance per volume calculate fuel economy preference by Volume per distance Then ... Select the Warnm me when deleting all log files from my Navman checkbox. select the Distance per volume option. select the Volume per distance option.
My subscriptions Safety camera information is only available for selected countries. Your Navman contains pre-loaded safety camera information. To subscribe to current Navman safety camera information, use the enclosed DVD to install NavDesk software on your computer. For the latest safety camera coverage, to subscribe to safety camera information and to see our latest offers, visit www.navman-stores.com.
Your software will update automatically. How do I update Safety Camera information on my Navman? Start All Programs Navman My Navman section will display a list of subscriptions already installed on your device. Icon Description Expired subscriptions. right click to purchase a new subscription.
Navman is not responsible for the content or accuracy of the information or the reliability or availability of these websites. The use of information regarding safety camera locations may be subject to local laws in the country of use. You are responsible for checking that you can use the information in your country or in the country where the information will be used.
Click on Add to device button to add the POI to your Navman. Note: A maximum of 25 custom POI files can be saved on your Navman. Each file corresponds to a POI category; for example, Hotels.csv will be listed in your Navman as the Hotels category.
The Voice Transfer application is part of NavDesk and allows you to install or remove voice files. Voice files take up space on your Navman’s internal memory. If you do not use a voice file, you can remove it to free up space.
S-SERIES PIN Security PIN Security is a feature which allows you to set a PIN on your Navman. The PIN will disable your Navman in the event of theft. To set a PIN you must first register your Navman with the Navman server.
In the User Name and Password fields, enter the username and password that you entered when registering online. In the PIN field, enter a new PIN you want to assign to your Navman. Note: Your PIN must be between three and eight numerical digits.
S-SERIES How do I backup my Navman? You can save backups of the following information, and later restore them to your Navman: Favourites and My Home Preferences, including Point of Interest and NavPix preferences Multi-stop trips Recent locations. How do I Backup my Navman?
CAUTION Do not to apply pressure to the centre of the memory card. How do I remove a Memory Card? Before removing the memory card, turn off the Navman. Next, gently push the top edge of the card to release it, and pull it out of the slot.
S-SERIES Remote Control Component Description Press twice to cancel the current route. Increases the volume. Decreases the volume. Turns the sound off or on. The volume bar displays as Navigate to My Home. Press once to display the My Home screen so that you can navigate home. Press again to calculate the route to My Home and display the map screen.
City Centre Company Convention Centre, Exhibition Centre Cultural Centre Doctor Embassy Ferry Terminal Frontier Crossing Golf course Hospital/Polyclinic Ice Skating Rink Leisure Centre, Sports Centre Military Cemetery Mountain Pass Museum Open Parking Area Petrol station Place of Worship Post Office S-SERIES...
Page 129
Branded Points of Interest Branded Points of Interest are available on some maps. These include well-known restaurants, accommodation providers, tourist attractions, petrol stations, etc. The icon will usually display the company logo. Point of Interest categories by Navman Icon Description...
A Traffic Event that has now been cleared. All other events. Roadworks are taking place on a route. Event Description A Traffic Event, for which a detour is recommended. A Clearance Event, for which a re-route is recommended. S-SERIES...
Microsoft, Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Navman New Zealand is under license.
You will find a fully searchable Frequently Asked Questions (FAQs) section for all Navman products. At least 90% of our customers find answers to their questions at support.navman.com, however if you require further support, you can use the online email option to contact us.