Getting Started; Be Outdoors; Fit The R300; Startup - Navman R300 User Manual

Gps sport.tool 300 series

Hide thumbs Also See for R300:

Table of Contents

NAVMAN

3.0 Getting started

The R300 is not intended for operation indoors or under water

as it uses Global Positioning System (GPS) satellites to get

time and date information, and to calculate distance and

speed. For best results, always use the R300 outdoors with an

unobstructed view of the sky.

The R300 is designed to be worn on the left upper arm. The

easiest way to ﬁt the unit is to feed the strap through the

fastener to create a loose enclosure. Then slide your left arm

through the enclosure and tighten the strap after the unit is in a

comfortable position.

Press and hold

press

to turn the power on and start normal operation.

First start may take up to 80 seconds to get all the satellite data

Flashing = seeking GPS data

Constant = GPS data obtained

Always enter setup ﬁrst if you wish to change settings.

To enter setup after starting normal operation, you will

need to shut down and re-start the unit.

�

to turn the power on and enter setup, OR

R300

R300 – Getting started

1-9

Table of Contents