SMA 800-TRL30NS Owner's Manual page 11

Intake Assembly 5278143
This sprayer comes with an On/Off
(shut-off) valve located at the inlet
location of the tank, towards the
underside. You must make sure the
valve is in the "open" position
before using your sprayer.
Troubleshooting Leaking Elbow on Manifold:
If your manifold is leaking at the elbow connection, remove the elbow from the
manifold. Quarter turn counter clockwise and lift off.
Look inside the cap and make sure the flat washer is in place.
If washer is in place, you'll notice a hexagon shape cutout. While holding the
elbow and cap at the same time, using an allen wrench, head of a bolt or a
standard screwdriver, something just big enough to catch the edges, give it a twist
clockwise to snug up the connection. The elbow is a two-piece interlocking
mechanism and may just be a little loose.
Replace on manifold.
Manifold Assembly 5281537
NOTES:
Page 11