Download Print this page

SMA 800-TRL15E Assembly / Operation Instructions / Parts

12 volt lawn & garden sprayer

Advertisement

Quick Links

ASSeMBLy / oPeRATIoN INSTRuCTIoNS / PARTS
before returnInG thIs product
for any reason, please call
1-870-935-3291
If you should haVe a QuestIon or
eXperIence a problem wIth your
sma product:
1-870-935-3291
before you call, please haVe the
followInG InformatIon aVaIlable:
sales receIpt & model number. In most
cases, a sma employee can resolVe
the problem oVer the phone.
General InformatIon
The purpose of this manual is to assist you in operating and
maintaining your lawn and garden sprayer. Please read
it carefully as it furnishes information which will help you
achieve years of dependable trouble free operation.
warnInG
do not use pump In an eXplosIVe
enVIronment. do not use to pump
flammable fluIds, GasolIne,
Kerosene, fuel oIl, etc.
warranty / parts / serVIce
Products are warranted for one year from date of purchase
against manufacturer or workmanship defects.
your authorized dealer is the best source of replacement
parts and service. To obtain prompt, efficient service, always
remember to give the following information:
5301786
model no. 800-trl15ec
12 Volt lawn & Garden sprayer
1. Correct part description and part number.
2. Model Number of your sprayer.
3. Serial Number of your sprayer.
Part description and part numbers can be obtained from the
illustrated parts list section of this manual.
Whenever you need parts or repair service, contact your
distributor / dealer first. For warranty work always take your
original sales slip, or other evidence of purchase date, to
your distributor / dealer.
technIcal specIfIcatIons
• Low Profile Trailer and Tank
• Polyethylene Tank
• 4.10/3.50 x 4 Pneumatic Tires
• 12 Volt Diaphragm Pump
• 2.1 G.P.M.
• Lever Handgun
• 15 Ft. of 3/8" Hose (Handgun)
• Pressure Gauge
• Adjustable Pressure Range (0-60 PSI Max.)
• Boom-2 Nozzles, 80" Coverage
assembly InstructIons
The sprayer is partially assembled at the factory. Follow the
instructions below to complete the assembly of this unit.
1. Attach the hitch brackets, both formed and flat, to the trailer
frame as shown in the exploded view drawing.
Im p o rta nt r e m I n d e r
This unit comes with an On/Off valve located near the inlet of the tank, towards the underside.
(See Detail A). You must make sure the valve is in the "open" position before using your unit.
2623 Commerce D r • J o n e s b o r o , A R , 7 2 4 0 1
P h o n e : 8 7 0 - 9 3 5 - 3 2 9 1
Form No. 1558
(5004969
F A X :
8 7 0 - 9 3 5 - 5 6 5 1
11/07)
Printed In u.S.A.
Page 1

Advertisement

loading

Summary of Contents for SMA 800-TRL15E

  • Page 1 InformatIon aVaIlable: assembly InstructIons sales receIpt & model number. In most cases, a sma employee can resolVe The sprayer is partially assembled at the factory. Follow the the problem oVer the phone. instructions below to complete the assembly of this unit.
  • Page 2: Operation

    2. The boom brackets are attached with only (2) bolts. Re- operatIon move the other (2) bolts from the boom brackets. Loosen the bolts which are holding the boom brackets in place. This sprayer is designed to be towed behind a garden Then rotate the boom brackets so the other (2) bolts can be tractor.
  • Page 3 Determining the proper speed of the tractor can be done by Refill the tank about half full with plain water and use a marking off 100, 200 and 300 feet. The speed chart indicates chemical neutralizer such as Nutra-Sol or equivalent and the number of seconds it takes to travel the distances.
  • Page 4 Page 4...
  • Page 5 Page 5...