SMA 800-B10 Owner's Manual

Technical Specifications

7-Nozzle Boom Assembly

Break-Away Outer Booms

140" of Spray Coverage

AIXR11002 VP, #2 (Yellow) 110° tips (**)

Check Valve Strainers, 50 Mesh, 5 PSI
(**) These tips provide excellent chemical and acid resistance, with
an exceptionally long wear life.
110° wide, tapered flat spray angle with air induction technology for
better drift management.
Compact size to prevent tip damage.
These teejet tips produce large air-filled drops through a venture air
aspirator.
General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your
boom kit assembly.
Retain a copy of your receipt for your unit,
as it will be required to validate any warranty service
Products are warranted against manufacturer or workmanship
defects for one year from date of purchase for home owner
usage and 90 days for commercial usage.
For technical assistance, call: TOLL FREE @ 1-870-935-3291
Our Technical Support Representatives will be happy to help you.
To obtain prompt, efficient service, always remember to give the
following information...

Correct Part Description and/or part number

Model #/Serial # of your sprayer
Part descriptions and numbers can be obtained from the illustrated
parts list section(s) of this manual.
OWNER'S MANUAL
Model: 800-B10 (5301595)
(7-Nozzle Boom Assembly)
Assembly Instructions
Remove the parts to the boom assembly from the carton.
Refer to the parts list and exploded view drawing to help
identify all the components.
1. Center the center section of the boom onto your boom
mounts and secure in place with the hardware provided.
Be sure that the outer booms will fold 'backwards'. The
boom should be a minimum of 18" above the ground.
2. Attach the nozzle harness assembly to the boom. The
end boom members should fold towards the rear of the
sprayer.
3. Route your boom feeder hose (not included) under the
unit, to the back end of the sprayer. Join the hose to the
'cross fitting'. Then clamp in place with a hose clamp.
CAUTION: Never use a metal object or other sharp item for
cleaning a nozzle tip. It is better to use a nozzle brush (NOT
wire brush) or compressed air for tip cleaning.
2415 Industrial Dr.—Jonesboro, AR 72401
Phone: 870-935-3291 : Fax: 870-935-5651
[5008002 (11/18)]
Page 1