Advanced Bionics Auria iConnect Instructions For Use Manual page 9

Figure 3. Turn on the MLxS.
*In order to use the iConnect, the processor must contain a program set up for
auxiliary input. A 50/50 or 30/70 Mic/Aux mix is recommended for use in the
classroom. Switch to this program when using the processor with the iConnect. Please
contact your center for fitting advice if necessary.
4. Removing the iConnect from the Processor
To remove the iConnect, first turn off the FM receiver. Then, turn the earhook slightly
more than a quarter turn in either direction until it pops off.
7