PROAIM CINEMA Series Assembly Manual page 6


Loosen and remove both the bolts at the
bottom of the Airwave V1060.

Now, Mitchell platform has been detached
from the Airwave V1060.

Insert and attach the Mitchell platform into
the Airwave V1060 by sliding it in an over-
slung manner.

After attaching the Mitchell Platform to the
Airwave V1060, insert the bolt and tighten it
with the help of the Allen key.

Also, align and match the side thread hole of
the Mitchell platform and the Airwave V1060,
and then insert and properly tighten the bolt
using the Allen key.

Now, the Mitchell platform has been properly
attached to the Airwave V1060 in an over-
slung manner.
6