PROAIM CINEMA Series Assembly Manual page 2

Airwave V1060 Setup

Loosen and open both the clamps of the
Airwave V1060.

Align the clamps of the Airwave to a Scaffold
Pole and then secure the clamp by properly
tightening the clamp knob.
NOTE: Airwave V1060 Arm can be securely
attached to a Dia 42mm-50mm Scaffold Pole or
Speed Rail with a quick-lock Scaff Mechanism.

Airwave V1060 has been properly attached to
the scaffold pole.

Align and place the weight rod on the top
part of the Airwave V1060, and then insert
the bolts by matching the thread holes.

Tighten both the bolts using an Allen key, as
shown in the image.

Open the air-filling pump.
2