How To Install Wireless Remote Controller; Not E; Refer To The Installation Instructions Attached To The Optional; Wireless Remote Controller - Panasonic S-36PU2E5B Installation Instructions Manual

If you wish to change the selected indoor unit, follow the
step 2.
<Procedure of CZ-RTC4>
Stop the system before performing these steps.
1 Press and hold the
simultaneously for 4 seconds or longer.
2 If group control is in effect, press the
At this time, the fan at the indoor unit begins and select
the address (unit No.) of the indoor unit operating.
3 Designate the item code "
Temperature Setting
=91
4 Press the timer time
desired setting data.
Flap position
4
5
* Setting data "
Setting data
Without separate setting
Swing
Move to position
Move to position
Move to position
Move to position
Move to position

NOT E

The flap swings during the operation under "Setting
the Flap Separately".
At this time, the unselected flaps are moved to the
position .
1
, and buttons
button to set.
" by adjusting the
/ buttons.
Electrical component box
=90
=93
=92
/ buttons to select the
1
2
3
"
Flap position during operation
and stay
1
and stay
2
and stay
3
and stay
4
and stay
5
5 Press the button.
(The display stops blinking and remains lit, and setting is
completed.)
If you wish to change the selected indoor unit, follow the
step 2.
6 Press the button to return to normal remote
controller display.
XX
3
A
6
8. HOW TO INSTALL WIRELESS REMOTE
CONTROLLER
N OT E

Refer to the Installation Instructions attached to the optional

Wireless Remote Controller.

26
°
YYYY
°
1
4
2
4
2
5