Exmark QUEST S Series Operator's Manual page 43

dirty conditions)(Exmark
engine).
Every 200 hours/Every 2
years (whichever comes
first)—Replace the air
cleaner paper element
(more often in dusty,
dirty conditions)(Exmark
engine).
Every 25 hours/Monthly
(whichever comes
first)—Clean the air
cleaner foam element
(more often in dusty,
dirty conditions)(Exmark
engine).
Every 100 hours/Yearly
(whichever comes
first)—Replace the air
cleaner foam element
(more often in dusty,
dirty conditions)(Exmark
engine).
Check the air cleaner daily or before starting the
engine. Check for a buildup of dirt and debris around
the air cleaner system. Keep this area clean. Also
check for loose or damaged components. Replace all
bent or damaged air cleaner components.
Note: Operating the engine with loose or damaged
air cleaner components could allow unfiltered air into
the engine causing premature wear and failure.
Note: Service the air cleaner more often under
extremely dusty, dirty conditions.
Removing the Elements:
1. Park machine on level ground, move the motion
control levers out to engage the parking brake,
disengage the blade control switch, stop engine,
and remove key. Wait for all moving parts to stop
before leaving the operator's position.
2. Clean around the air cleaner cover to prevent dirt
from getting into the engine and causing damage.
3. Lift the cover and rotate the air-cleaner assembly
out of the engine (see Figure 30 and Figure 31).
4. Separate the foam and paper elements.
Cleaning the Foam and Paper Elements:
Foam Element:
Wash the foam element with water.
Important: Replace the foam element if it is
torn or worn.
43
Maintenance
Figure 30
Figure 31
Figure 32
g027800
g027801
g027802