Overload Protection - JEI MAGBEAST HM200T Operator's Manual

[7] SPEED SELECTION—Speed Adjustable with volume switch
1. Method of Gear Change
The machines are equipped with a mechanical four-speed gearbox.
Please just turn the lever to the right or left to change gear.
It is not necessary to set the gear in neutral to change gear.(patented)
2. Gear Selection

[8] OVERLOAD PROTECTION

HM200T-200 is extreme heavy duty machine. So it has electronic overload protection
system for unexpected over-torque during drilling or tapping.
Nomally the sensor is set at 14~15A at factory. But if necessary it can be adjusted.
9 | P a g e
--NO LOAD RPM of each gear--
1 st 40/60
2 90/130
nd
3 170/240
rd
4 380/545
th
MAGBEAST HM200T