Enviromental Protection - JEI MAGBEAST HM140T Safety Instructions And Operator's Manual

26. ALWAYS KEEP THE MOTOR AIR VENT FULLY OPENED: A constantly open motor vent is
necessary to allow air to come in and out for cooling the motor. Do not allow it to become
clogged up, even if the dust is blown through it.
27. OPERATE POWERTOOLS AT THE RATED VOLTAGE: Operate power tools at voltages
specified on their nameplates.
28. NEVER TOUCH THE MOVING PARTS: Never touch the moving parts such as blades, bits,
cutters and others.
29. STOP OPERATION IMMEDIATLEY IF ANY ABNORMALITY IS DETECTED: Should a power
tool be detected as out of order or should other abnormalities be observed during
operation , stop using the tool immediately.
30. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF: Don't leave tool until it
comes to a complete stop.
31. CAREFULLY HANDLE POWERTOOLS: Should a power tool be dropped or struck hard against
hard materials inadvertently it may be deformed, cracked or damaged.
32. DO NOT WIPE PLASTIC PARTS WITH SOLVENT: Solvents such as gasoline, thinner, benzene,
carbon tetrachloride, and alcohol may damage and crack plastic parts. Do not wipe them
with solvents. Wipe plastic parts with a soft cloth lightly dampened with soapy water.
33. WHEN REPLACING A COMPONENT PART, ADOPT THE SAME TYPE: When replacing a
component part with a new one, adopt the same type of new part. Also never attempt to
repair a power tool yourself.

ENVIROMENTAL PROTECTION

Raw material recycling instead of waste disposal
In order to avoid damages on transportation, the power tool has to be delivered in sturdy packing.
The packing as well as the tool and its accessories are made of recyclable materials and can be
disposed accordingly.
The tools plastic components are marked accordingly to their material, which makes it possible to
remove environmental friendly and differentiated because of available collection facilities.
ONLY FOR EU COUNTRIES
Do not dispose of household tools together with household waste material, In
observance of European directive 2002/96/EC on waste electrical and electronic
equipment and its implementation in accordance with national law, electric tools
that have reached the end of their life must be collected separately and returned to
an environmentally compatible recycling facility.
NOISE EMISSION / VIBRATION
6 | P a g e