JEI MAGBEAST HM200T Operator's Manual page 11

① MAGNET SWITCH: Main switch of Machine
②SPEED :
- HI: GEAR RPM
- LO: Electronic RPM, About 75% of HI
③ ROTATION SWITCH
- FOR: Forwarding (CW: Clockwise)
- REV.: Reverse (CCW: Counter Clockwise)
[10] PROTECTION-GEAR SLIP
HM200T has a slip system for protection.
against overload in cutters at first gear.
Adjust the torque of LOCK NUT
with torque wrench.
Normally HM200T is set at 80 Nm
11 | P a g e
MAGBEAST HM200T