Drum Belt - Haier GE GFD14ESSNWW Technical Service Manual

Drum Belt

The drum belt extends from the idler pulley to
around the perimeter of the dryer drum.
Drum Belt Removal
1. Remove the top cover and front panel (see
Top Cover and Front Panel in this section of
this service guide).
2. Remove the front drum support by
removing the five Phillips-head screws and
disconnecting the harness from the clips.
3. Once the front drum support is removed,
reach in from the front. With both hands
around the blower housing on both sides,
disconnect the belt by lifting upwards on the
idler pulley.
4. The drum can then be removed to access the
rear drum bearing.
– 40 –
Push
Upwards