NOTE: Ensure to note the position of the idler
pulley spring.
Motor Drive Belt
The motor drive belt extends from the motor
pulley to around the perimeter of the idler pulley.
Motor Drive Belt Removal
1. After the drum belt has been removed, the
drive belt can then be walked off of the
perimeter of the idler pulley.
Drum and Rear Drum Bearing
The rear drum bearing consists of a bearing
support mounted to the drum and the bearing.
Drum Bearing Removal
1. Remove control panel, control panel mounting
bracket, top cover, front panel, front drum
support and drum (see Control Panel and
Front RJ45 Access, Top Cover, Front
Panel, and Drum Belt sections of this service
guide).
2. Disconnect the drum belt from the motor
pulley.
3. Slide the drum forward to access the rear
bearing.
– 41 –