Table of Contents
Advertisement
REF. 8: MAINTENANCE / SERVICE REQUIREMENTS
The high pressure cleaner, must be checked and serviced regularly to
ensure that the equipment remains in proper working order.
Inspections should be carried out by qualified personnel, i.e. Industroclean
service technicians or personnel trained by Industroclean South Africa.
The frequency of inspections and maintenance work is relative to the number
of operating hours accumulated.
We would like to draw to your attention that Industroclean offers a
maintenance plan. The concept of preventative maintenance is well proven
and in our opinion constitutes the best method of ensuring the satisfactory
performance of the equipment.
WEEKLY INSPECTION OR AT LEAST EVERY 40 HOURS OF OPERATION
• Check oil level of the high pressure pump.
• Check for water leaks in the entire high pressure system.
• Check water filter (if fitted).
• Check spray lance for leaking valve mechanism or faulty O-rings at the couplings.
• Check high pressure hose for leaks or excessive abrasion.
MONTHLY / 2 MONTHLY SERVICE - AT LEAST EVERY 250 - 300 HRS OF
OPERATION
• Change pump oil of high pressure pump.
• Clean out water filter if fitted.
• Carry out functional test of the by-pass valve/pressure regulating block.
• Re-adjust, or replace seal kit if necessary.
• Replace high pressure nozzle if it shows signs of damage or washed out aperture.
• Replace nozzle protection cap, if necessary.
• Check flexi-coupling for damage or wear.
• Replace O-rings of trigger / spray lance couplings.
• Check pistol and replace seal kit, when necessary.
• Inspect chemical supply hose strainer and clean if necessary.
• Clean machine and secondary equipment.
PAGE NO: 15
Advertisement
Table of Contents
