Table of Contents
Advertisement
REF. 6: CHEMICAL APPLICATION
Ref. 6. Chemical Application Procedure under Low Pressure
Chemical application under low pressure is possible in conjunction with the Venturi
based chemical injector and chemical flow actuator nozzle.
Step 1:
To facilitate this, a chemical container with a suitably pre-diluted additive must be
placed next to the pressure cleaner and connected by means of the chemical feeder
hose.
Step 2:
Use the chemical dosing lever to adjust
the mixture, - "up" for more and "down" for less.
Step 3:
Rotate the chemical actuator valve (1) to reduce
the operating pressure sufficiently to activate
the Venturi chemical injector.
Fully opened = low pressure / chemical stage
Fully closed = high pressure / no chemicals
PAGE NO: 13
Advertisement
Table of Contents
