Table of Contents
Advertisement
Preface
Content of the system manual
This system manual describes:
• The ATD400T controller that you use for railway applications
• Geared motors, power supplies, additional units that you can use with the control units.
• Optional additional units (e.g. SIDOOR SERVICE TOOL).
Target group
The system manual is intended for fitters, commissioning technicians, owner-operators,
service engineers and configuration engineers of interior railway doors.
Firmware versions
This system manual applies to SIDOOR ATD400T door controllers with firmware version V4.09
or higher
Figures
The illustrations in this system manual show the SIDOOR USER SOFTWARE version 1.2 and the
SIDOOR controller. The illustrations for other versions may differ slightly.
Information on the Internet
You can find more information about SIDOOR door drives and their application on the
Internet (https://w3.siemens.com/mcms/siplus/en/sidoor/Seiten/Default.aspx).
Parameter documentation
Record the determined, optimal parameter settings in the configuration protocol (see
appendix "Configuration record"). Have this record to hand when you call the Hotline.
Recycling and disposal
The products are low in pollutants and are recyclable. For environmentally compliant
recycling and disposal of your electronic waste, please contact a company certified for the
disposal of electronic waste.
SIDOOR ATD400T door control units for railway applications
System Manual, 06/2020, A5E42201947-AB
3
Advertisement
Table of Contents
