Subscribe to Our Youtube Channel
Related Manuals for Displays2go TSECOTSW
Summary of Contents for Displays2go TSECOTSW
- Page 1 Assembly Instructions Assembly Instructions SKU: TSECOTSW SKU: TSECOTSW tanding tanding ignage ignage...
-
Page 2: Parts List
E. Screw 2in ........... 2 F. Wing Nut ..........6 Tool recommended: Hex wrench. Scan QR code to visit product page If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388. - Page 3 1. Unfold the signage board and expand both ends to reach full width. 2. Attach one side panel to the end and align precut holes at the same level. Insert 1.5in screws into top and middle holes and fix with wing nuts from the inside. Note: Do not fix the bottom.
- Page 4 3. Assemble the other side panel the same way as in Step 2 . 4. Fold in both side flaps on the back panel and attach it to the back of the signage board. Use 2in screws and wing nuts to fix the back panel and stablize the whole signage wall.
-
Page 5: Contact Information
5. The assembly is finished. Position the signage wall at the desired angle and location. Enjoy your new Enjoy your new Standing Signage Wall! Standing Signage Wall! CONTACT INFORMATION: www.displays2go.com PHONE: 844-221-3388...
Need help?
Do you have a question about the TSECOTSW and is the answer not in the manual?
Questions and answers