Set Communication - ADF Web HD67983-B2-IA User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section define the fundamental communication parameters of two buses, IO-Link and
PROFINET.
By Pressing the "Set Communication" button from the main window for SW67983 (Fig. 2)
the window "Set Communication" appears (Fig. 3).
The means of the fields for "Ethernet Connection" are:
In the field "Device Name
defined;
If the field "Obtain an IP Address Automatically (DHCP for Cable
is checked, DHCP for LAN connection is enabled;
If the field "Enable DNS" is checked, DNS protocol is enabled;
In the field "Primary DNS" the IP Address of the primary DNS server is defined;
In the field "Secondary
The means of the fields for the "PROFINET Master" section are:
In the fields "IP ADDRESS" the IP address of PROFINET side of the converter is
defined;
In the fields "SUBNET
defined;
In the fields "GATEWAY" the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net;
In the field "Name of
defined.
The means of the fields for "IO-Link Slave" are:
In the field "Baudrate" the standard baudrate used by the IO-Link interface is
defined.
ADFweb.com S.r.l.
(Hostname)" the Hostname to assign to the converter is
DNS" the IP Address of the secondary DNS server is defined.
Mask" the SubNet Mask of PROFINET side of the converter is
Station" the name used for PROFINET communication is
User Manual IO-Link Slave / PROFINET Master
Document code: MN67983_ENG
Connection)"
Figure 3: "Set Communication" window
Revision 1.000 Page 18 of 30