Waterous CM Series Overhaul Instructions page 30

Safety
Disassembling the Impeller Shaft with Packing
3
Introduction
5
Disassembly
4
6
30 | 70
Assembly
Use the illustrations and instructions to disassemble
the impeller shaft.
3 Clean and lubricate the shaft, then pull on the
seal housing to release the packing. Remove
the packing rings and lantern ring.
Note: An optional packing removal tool (5782)
is available from Waterous.
4 Remove and discard the seal housing
gaskets.
5 Remove the wear ring.
6 Remove the retaining ring.
Note: An optional retaining ring removal tool
(62917) is available from Waterous.