Door Switch; Basic Parameters; Checking Method - Hisense BCD-740WPCZR/HC1(H) Service Manual

44
Picture1 Picture2
6.6.3.2 Removing the refrigerator side light
1. Remove the light cover by prying open the light cover with a screwdriver, as picture 1;
2. Remove the light and remove the wire connector by pressing the top of them, as picture
2;
Picture1 Picture2

6.7 Door switch

6.7.1 Basic parameters

Load voltage: DC5V
Load current: 0.05A

6.7.2 Checking method

Fridge door switch
1.Check the connecting wiring of door switch is well or not, repair if it is broken.
Refrigerator freezer door switch corresponding pins as the drawing below.
2.The fridge doors switch is corresponding pin No.11 and No.20 on CN8 connector of
mainboard, as the drawing below.
3.Check the magnet on the fridge doors is dropped out or not.
Hisense Refrigerator