Using Your Appliance - Hisense BCD-740WPCZR/HC1(H) Service Manual

First of all, you need to purchase a new
water filer. You can purchase the new filter
from the retailer where you purchased
your refrigerator or the Hisense after-sales
service system.
Before that, please check that the new
filter is the same filter type that came with
your fridge and can be correctly used in
your refrigerator.
After you change the water filter, touch
and hold the "Eco" buttons for 3 seconds
to make the blinking stop. When you
replace the water filter, some water may
leak from the filter and lines. Please let the
water flow into a pan and wipe up any
leakage that may have occurred.
℉/℃
When the Child Lock is off, you can touch
the "℉/℃" icon to switch between Celsius
and Fahrenheit units. The default state is
Fahrenheit display. When it is switched to
Fahrenheit, the icon " " will be on.
Dispenser Control
When the Child Lock is on, the dispenser
will not work. The Ice Type button includes
"Cubed" and "Crushed" options.

4.2 Using your Appliance

This section tells you how to use most of the useful features. We recommend that you
read through them carefully before using the appliance. It may be different depending on
the model
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
You can press the " Cubed" or " Crushed"
option to choose the type of Ice to be
dispensed. You can touch the " Water"
button to activate the water mode.
When you touch the Ice Type button, the
cubed or crushed ice mode which you
choose will be activated, and the Cubed
" " or Crushed " " ice icon lights up.
If you don't need ice, turn the function
off to save on water and energy
consumption(See Ice Off above). If you
need water, please touch the"Water"
button, and the water icon " " will light
up. The mode is then set.
Demo mode
Demo mode is for store display, and it
prevents the refrigerator from generating
cool air. In this of Cooling off Mode, the
refrigerator may seem like it is working but
it will not make cool air. indicators on the
control panel will show and hold "Alarm"
and "Eco" keys at the double " 0F" . To
cancel this mode, press and hold "Alarm"
and "Eco" keys at the same time for 3
seconds until the buzzer beep three times
and the display panel will light for 3
seconds.
energy, it is necessary to maintain good
ventilation around the appliance for the
dissipation of heat. For this reason,
sufficient clear space should be available
around the refrigerator.
1. Leveling of appliance

For sufficient leveling and air circulating
in the lower rear section of the appliance,
the bottom feet may need to be adjusted.
11 / 62