Repairing Rear Brake Caliper; Repairing Brake Caliper Cii 41 - Skoda Octavia II 2004 Workshop Manual

2

Repairing rear brake caliper

Repairing brake caliper CII 41

Repairing brake caliper CI 38
Removing and installing the brake caliper piston CII 41 or CI 38
⇒ page 162
Repairing the brake caliper Bosch BIRIII
Removing and installing the brake caliper piston Bosch BIRIII
⇒ page 164
Pre-bleeding the brake caliper
2.1 Repairing brake caliper CII 41
Note
Brake inspection ⇒ page 8
♦
Install the complete repair set when undertaklng repairs.
♦
Use only methylated spirits for cleaning the brake.
♦
Thinly coat brake cylinder, piston and gasket ring with lithium grease - G 052 150 A2- .
♦
The brake calipers must absolutely be pre-bled before installing them in the vehicle (without brake pads) in
♦
case of a repair or when replacing them with new brake calipers
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 159
⇒ page 161
⇒ page 163
⇒ page 166
.
Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
⇒ page 166 .
2. Repairing rear brake caliper
159