Brake Fluid; Brake Inspection - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
Engine
Engine code letters:
Master brake cylinder - ∅
Brake servo unit - ∅
♦ Front disc brake:
Front brake caliper (type denomina‐
tion)
Front brake caliper, piston - ∅ mm
Front brake disc – ∅
Brake disc, thickness
Brake disc, minimum thickness mm
Pad thickness without support‐
ing plate
Minimum pad thickness with‐
out supporting plate
♦ Rear disc brake:
Rear brake caliper (type denomina‐
tion)
Rear brake caliper, piston - ∅ mm
Rear brake disc – ∅
Brake disc, thickness
Brake disc, minimum thickness mm
Pad thickness without support‐
ing plate
Minimum pad thickness with‐
out supporting plate
1)
valid for vehicles with front-wheel drive
2)
valid for vehicles with four-wheel drive
1.2

Brake fluid

Classification N 052 766.Z0 according to the USA standard FMVSS 571.116 DOT4 and VW standard
501 14
Change ⇒ Maintenance ; Booklet Octavia II
1.3

Brake inspection

General information:
♦ The test stand is used as drive.
♦ During the testing, the idling speed must be set on vehicles
with manual gearbox and the driving position »N« must be
engaged on vehicles with automatic gearbox.
♦ When conducting the test, observe the specifications provided
by the manufacturer of the test rig.
8
Rep. gr.00 - Technical data
2.0 l/81 kW TDI CR
CFHF
mm 22.2
Inch Left-hand
drive:
Right-hand drive:
FS-III
54.0
mm 280.0
mm 22.0
19.0
mm 14.0
mm 2.0
Bosch
1)
CI 38
BIRIII
38.0 38.0
mm 253.0 272.0
mm 10.0 10.0
8.0 8.0
mm 11.0 11.0
mm 2.0 2.0
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
2)
10
7"/8" - tandem