Connecting The Brake Lines From The Master Brake Cylinder To The Abs Hydraulic Unit - Left; Hand Drive - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
Brake systems - Edition 11.2017
21 - Brake fluid reservoir
22 - Screw cap
23 - Heat protection plate
24 - Self-locking nut, 8 Nm
25 - Self-locking nut; 20 Nm
26 - Console
27 - Screw, 8 Nm
28 - Screw, 8 Nm
❑ to bracket on console
29 - Mounting bracket
6.3 Connecting the brake lines from the
master brake cylinder to the ABS hy‐
draulic unit - left-hand drive
Connect brake lines to the master brake cylinder
A - from master brake cylinder (push rod piston circuit) to ABS
hydraulic unit
- Distinguishing feature: ∅ 6,5 mm and pipe screw with thread
M12 x 1
B - from master brake cylinder (floating piston circuit) to ABS hy‐
draulic unit
- Distinguishing feature: ∅ 6,5 mm and pipe screw with thread
M12 x 1
1 - Hydraulic unit to front left brake caliper
3 - hydraulic unit to rear right brake caliper
4 - hydraulic unit to rear left brake caliper
66
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�