Light - Hisense BCD-560WPZ/HC1 (H) Service Manual

40

6.6 Light

6.6.1 Basic parameters
Rated voltage: DC12V
6.6.2 Checking method
Check the connecting wiring between light and mainboard is well or not. Repair if it is
broken. Refrigerator light corresponding pin No.5 and No.9 on CN6 connector of
mainboard,freezer light corresponding pin No.6 and No.9 on CN6 connector of the
mainboard, variable light corresponding pin No.7 and No.9 on CN6 connector of
mainboard, as the drawing below.
Check output voltage corresponding light of the mainboard, if it is 12V, it means the
mainboard is OK, change the light; If not, it means the mainboard is not OK, change it.
6.6.3 Removing the light
1. Unplug the appliance.
2. Remove the light cover, as picture 1 and 2.
3. Remove the light, as picture 3 and4.
1. The location of the
LED light.
2.Use a screwdriver
to pry open LED light
shade card buckle.
Hisense Refrigerator