Hisense BCD-560WPZ/HC1 (H) Service Manual page 11

Table of Contents

Advertisement

11
turned the
icon lights.
2. To use the ice, open the freezer
compartment door, then pull open the
upper freezer drawer and remove ice from
the storage box.
3. For your health, please don't use the ice
on the first day of using the refrigerator.
Energy saving
Press the "MODE" button to turn on the
energy saving function, the "Energy saving"
icon will be illuminated.
1. When the "Energy saving" function is on,
the temperature of fridge is automatically
switched to 43℉(6℃) and the temperature
of freezer is automatically switched to 1℉
(-17 ℃ ), the temperature of My Fresh
Choice compartment is immovability.
2. When energy saving function is on you can
switch it by pressing the "MODE" or "TEMP"
button and the refrigerator temperature setting
will back to the previous setting.
Door Open Alarm
If a door is open for longer than 2 minutes,
an alarm will sound to alert you and the
control panel will display "dr". The alarm
will sound 3 times every minute for 8
minutes.
• To turn off the alarm, close all doors
completely.
Demo Mode
4.2 Changing the water filter
Caution:
Please refer to the owner's manual for proper maintenance and operation. If this device is
not maintained and operated as specified in the owner's manual, there is a risk of
exposure to contaminants.
For more information, visit global.hisense.com or the California State Water Resources
control Board's web site at www.waterboards.ca.gov.
To change the water filter, follow these
steps:
1. Demo Mode is for store displaying only.
To enter this mode, you could press the
leftmost key "POWER" and the rightmost
key "ICE" at the same time for 3 seconds
then you can hear a voice and see the
whole control panel light up for 1 second.
2. In this mode, the light and the display
operation is normal, but the refrigerator is not
cooling. When the refrigerator is in the Demo
Mode, if consumers open the door or no keys
operation for 30 seconds with the door opened,
the temperature control panel will show as
follow from A to F
3. To exit this mode, you could press the
leftmost key "POWER" and the rightmost key
"ICE" at the same time for 3 seconds, then
you can hear a voice and see the whole control
panel light up for 1 second.
NOTE: The Demo Mode stays on even if the
refrigerator power off. If the consumers enter
the mode with unintentional operation, you
should exit it as soon as possible, since the
refrigerator.
℉/℃
To toggle between Celsius and Fahrenheit on
the display, press and hold the "TEMP" button
for three seconds.
1. Shut off the water supply, then pull the
handle under the cover outwards to open

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents