Operation And Functions; Display Controls - Hisense BCD-560WPZ/HC1 (H) Service Manual

9

4. Operation and functions

4.1 Display controls

Use your appliance according to the following control regulations, your appliance has the
corresponding functions and modes as the control panels showed in the pictures below.
When the appliance is powered on for the first time, the backlighting of the icons on
display panel starts working If no buttons have been pressed and the doors are closed,
the backlighting will turn off.
POWER
Press and hold the "POWER" button for 3
seconds to turn the power function on or
off. When the power function is on, the
"POWER" icon lights, the refrigerator is
stopped cooling.
Setting Compartment Temperatures
When you set a temperature, you are
setting an average temperature for the
entire compartment.
compartment temperatures may vary from
the temperatures displayed depending on
the amount and placement of stored food,
and the surrounding room temperature.
Recommended Temperature Settings
• Fridge Compartment: 39℉(4° C)
• Fresh Choice Compartment: 19℉(-7° C)
• Freezer Compartment: 0℉(-18° C)
Refrigerator (Fridge)
Temperature
1. Press ZONE repeatedly until the Fridge
icon appears.
2. When Fridge is on,
and then press TEMP. repeatedly to cycle
through the available temperature settings,
from 46℉ to 36℉ (8° C to 2° C).
NOTE: Each press of the button decrease
the setting by one degree.
3. Release the TEMP. control when the
desired temperature setting appears.
My
Temperature
The actual
1. Press ZONE repeatedly until the My
Fresh Choice appears.
2. When My Fresh Choice is on,
illuminated
Compartment repeatedly to cycle through the available
temperature settings, from 41℉ to -4℉
(5° C to -20° C).
NOTE: Each press of the button decrease
the setting by one degree.
3. Release the TEMP. control when the
desired temperature setting appears.
is illuminated
Freezer Compartment Temperature
Fresh Choice
and then press
Compartment
is
TEMP.