Connecting The Power Cord For A Psr450-12A/Psr450-12A1 Power Supply; Connecting The Power Cord For A Psr450-12Ahd Power Supply - H3C S6825 Series Installation Manual

Connecting the power cord for a PSR450-12A/PSR450-12A1
power supply
1. Insert the female connector of the power cord supplied with the power supply into the power
receptacle on the power supply.
2. Use a releasable cable tie to secure the power cord to the handle of the power supply, as shown
in Figure2-31.
3. Connect the other end of the power cord to an AC or DC power source.
Figure2-31 Connecting the power cord (PSR450-12A power supply)
(1) Releasable cable tie
(2) Fasten the cable tie to secure the power cord to the handle of the power supply
Connecting the power cord for a PSR450-12AHD power
supply
1. Slide the cable clamp onto the tie mount on the power supply, as shown in Figure2-32.
2. Connect the female connector of the power cord to the power receptacle on the power supply,
as shown in
3. Close the cable clamp and slide it forward until it is flush against the edge of the female
connector, as shown in Figure2-34.
4. Connect the other end of the power cord to an AC or DC power source.
Figure2-32 Connecting the power cord for a PSR450-12AHD power supply (1)
Figure2-33 Connecting the power cord for a PSR450-12AHD power supply (2)
Figure2-33
2-23