Parts List - NEC IW77 Assembly Instructions Manual

IWSTAND Assembly Instructions
The IWSTAND is designed to hold the NEC
Interactive Whiteboard.
stand, please review these important instructions.
The following instructions will guide you through the steps for assembly.
If you require assistance or are missing parts, contact NEC by email at
Required tools are: Hex key (5mm supplied)
It is important to layout parts prior to beginning assembly.
Item Qty
1 1 Hanger Bracket
2 1 Right vertical sliding assembly
3 1 Left vertical sliding assembly
4 1 Frame Extrusion; lower stationary horizontal member
5 1 Frame Extrusion; lower moving horizontal member
Frame Extrusion; top moving horizontal member
6 1
7 2 Frame Extrusion; leg
8 2 Left Support Bracket
9 2 Right Support Bracket
10 2 "U" Bracket (
11 4 Button Head Socket Screw; M8 x 20 ( 3/4" L)
12 4 Philips Head Machine Screw; M6 x 35 ( 1 1/8" L)
13 2 Philips Head Machine Screw; M4 x 10 ( 3/8" L)
14 8 Hex Head Cap Screw; M8 x 60 ( 2 3/8" L)
15 8 Washer; M8 - 24mm OD ( 1" OD)
16 4 Lock Nut; M8 thread
17 4 Locking caster; 3/8-16 shank
18 6 End Cap; black
19 6 Fastener; black
20 2 Bracket, Lower Board
Before you attach your board to the
Estimated assembly time is 15 minutes.
http://www.necdisplay.com/SupportCenter
Adjustable or Open end wrench (13 mm not supplied)
Philips Head screwdriver (not supplied)

Parts List

Description
bottom mounting bracket from NEC IW77
© NEC Display Solutions of America. All Rights Reserved, 2007
IW77
Color Dot
Black
Light Blue
Red
Orange
Dark Blue
Yellow
)
3