Fresenius Kabi Freka PEG FR15 ENFit Quick Start Manual

How to change the
Freka PEG FR15 ENFit
®
Intestinal feeding tube Y-Connector
Connection of the Y-Connector
to the gastric tube
To remove the Freka Click Adapter,
squeeze the contoured surfaces of the
Click Adapter firmly between two fingers.
Attach the white screwing aid from the new
Freka connector end on to the existing pale
blue fixation screw. Unscrew the Freka
Y-Connector off the gastric feeding tube
and remove the white screwing aid.
Getting ready
• Always refer to local guidelines
• Collect all equipment needed on a clean table or tray
• Wash and dry hands before and after changing the Freka
PEG FR15 ENFit Intestinal feeding tube Y-Connector
1
Pull out the intestinal tube carefully for
approximately 3 - 4cm.
4
With the clamp remaining closed, cut the
tube as shown in the image which will
remove the Freka Click adapter. Now
remove the unscrewed Freka Y-Connector
and the pale blue fixation screw.
®
2
To prevent the intestinal tube from
slipping, close the tube clamp for fixation.
5
Attach the white screwing aid on to the
new pale blue connector. Push the blue
and white fixation screw for the Freka
Y-Connector ENFit over the gastric
tube as shown.
3
6