User Controls; On Screen Display; How To Operate - NEC U300X User Manual

If no button operation

is made for 30 seconds,
the OSD will be closed
automatically.

On Screen Display

The Projector has a multilingual On Screen Display that allows
you to make image adjustments and change a variety of set-
tings. The projector will automatically detect the source.

How to operate

1.
To open the OSD, press the MENU button on the Remote Control.
2.
When OSD is displayed, use the
in the main menu. While making a selection on a particular page,
press the button to enter sub menu.
3.
Use the buttons to select the desired item in the sub menu
and adjust the settings by using the
4.
If the setting has
enter another sub menu. Press the MENU button to close the sub
menu after adjustment.
5.
After adjusting the settings, press the MENU button go back to the
main menu.
6. To exit, press the MENU button again. The OSD will be closed and
the projector will automatically save the new settings.
Sub Menu

User Controls

buttons to select any item
or
icon, you could press the ENTER button to
Main Menu
Setting
button.
31 ... English